CNC universal tool miling machine manually uses "SIEMENS808D" numerical control system. Manual mode and numerical control mode switch can be used according to demand. The machine has the function of both general universal tool miling machine and CNC universal tool milling machine.
1 、3-axis simultaneous, 4-axis control.
2 、NC rotary table can be equipped.
3、Spindle NC control stepless transmission.
4、Three way independent electronic hand wheel, easily to be operated.
5、With protection cover on cutting zone of working table, ensure safe and clean.
6、Auto tool change with hydraulic clamping unit. Quick, easy and low noise.
7、Sticking plastic guide rail coordinates with superaudio guide rail. High accuracy.
8、Accurate transmission drived by three way ball screw, lower noise.
9、With different kinds of accessories, it can enlarge the range of application, enhance working efficiency.
Main specifications | XKF8130 | XKF8140 |
Range of spindle speed | 0-3200rpm | 0-3200rpm |
Power of main motor | 3.5KW | 5.5KW |
Table size(LxW) | 750x300mm | 800x400mm |
Travel of table(longitudinal x transverse x vertical) | 360x250x400mm | 500x350x400mm |
T-slots(number x width) | 5x14H7 | 7x14H7 |
Max.loading of worktable | 150kg | 300kg |
Taper hole of spindle | ISO40 | IS040 |
Quill travel | 60mm | 80mm |
Inclining from left to right of spindle axis | ±90° | ±90° |
Range of feed speed | 10-3000mm/min | 10-3000mm/min |
Rapid travel | 4000mm/min | 4000mm/min |
Resolution ratio | 0.001mm | 0.001mm |
Machine weight | 1500kg | 2000kg |
Packing dimension(Lx WxH) | 270x191x228cm | 290x215x232cm |
The following special accessories are available if ordered:
1 、Univereal table
2 、Rotary table
3 、Parallel vice
4 、Dividing head
5 、Slotting head